215m3 Posted March 1, 2022 Report Share Posted March 1, 2022 Hi I have no experience of working with the rear suspension and hope someone with experience can help? It is sitting at the maximum height, but when the switch in the boot is pressed it goes down. What do I need to check to fix the fault? Thanks Quote Link to comment Share on other sites More sharing options...
Bean Posted March 1, 2022 Report Share Posted March 1, 2022 @Goce - He's likely our resident Mi16x4 expert even though he did a RWD conversion on his! Can you provide more details on what the expected result should be? We never got the car in North America, but any vehicle system should be fairly straight forward to troubleshoot. Rabin Quote Link to comment Share on other sites More sharing options...
215m3 Posted March 1, 2022 Author Report Share Posted March 1, 2022 14 minutes ago, Bean said: @Goce - He's likely our resident Mi16x4 expert even though he did a RWD conversion on his! Can you provide more details on what the expected result should be? We never got the car in North America, but any vehicle system should be fairly straight forward to troubleshoot. Rabin The suspension sits at the highest setting and is rock-hard. Quote Link to comment Share on other sites More sharing options...
Goce Posted March 27, 2022 Report Share Posted March 27, 2022 The switch in the boot is to be used only in emergencies when vehicle gets stuck. The switch applies max pressure and there is no suspension travel. So don't use it you'll blow a line or a seal. What is the problam with your's or you are just learining about the car? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.