jerro Posted January 16, 2013 Report Share Posted January 16, 2013 Ok, so it`s me again, i haven`t gone out of my mind (yet) but wanted to confirm which are intake and which are exhaust valves in my picture ( 2.5 -XD3T turbo diesel 1986) before i go ahead and adjust the valve clearances, just in case there is some strange Peugeot quirk where one is french and one is English. Am i right to say that in my photo, from the bottom of pic upwards the valves are --inlet--EXHAUST --EXHAUST--inlet --inlet--EXHAUST--EXHAUST-- inlet ? Looking at the manifolds this looks about right but i don`t want to blow it!---Thanks as always--Jerro Quote Link to comment Share on other sites More sharing options...
Bean Posted January 16, 2013 Report Share Posted January 16, 2013 That's how I see them. Exhaust only has two ports off the head so they have to be paired like that. Rabin Quote Link to comment Share on other sites More sharing options...
jerro Posted January 26, 2013 Author Report Share Posted January 26, 2013 Well, all done! set all gaps on rockers, new rocker cover gasket, runs much smoother and starts way easier! thanks everyone, appreciate it---- Quote Link to comment Share on other sites More sharing options...
Peugeottogo Posted January 26, 2013 Report Share Posted January 26, 2013 Great news update jerro. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.