brandon Posted May 1, 2011 Report Share Posted May 1, 2011 Hi Everyone, I need guidance on how to properly replace my inner and outer tie rod on my 1981 505 XD2. I have the passenger wheel off and outer tie rod disconnected but I am unsure of what the correct tool to use in order to pull the inner tie rod. Thanks for any help! (as I am learning slowly how to work on my Peugeot) ...... attached is a picture of the inner tie rod connection...... Quote Link to comment Share on other sites More sharing options...
Guest ouigpt Posted May 1, 2011 Report Share Posted May 1, 2011 ...working from memory/ don't sue me! Let's call your pic two balls. The upper ball has a male thread that screws in the racks big ball. In between the two balls you see a thin ring. This ring locks the inner tie rod. A gazillion guys will help. That's all I remember. Hi Everyone, I need guidance on how to properly replace my inner and outer tie rod on my 1981 505 XD2. I have the passenger wheel off and outer tie rod disconnected but I am unsure of what the correct tool to use in order to pull the inner tie rod. Thanks for any help! (as I am learning slowly how to work on my Peugeot) ...... attached is a picture of the inner tie rod connection...... Quote Link to comment Share on other sites More sharing options...
Bean Posted May 2, 2011 Report Share Posted May 2, 2011 Pipe wrench or something similar on the smaller dark metal ball. You can actually see wrench marks on it - likely from the install. Good job on learning to fix it yourself too! Rabin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.