Peder
-
Posts
29 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Collections
Everything posted by Peder
-
But if you are gonna go with multiple coil you still need too keep the distributor(with the hallsensor for camsync)! unless you are gonna use a multitooth wheel!? //Peder
-
Did not know if anyone answered the question about 5 or 7pins on the AFM? Here it goes anyway; The old ones with 7 pins the two last pins are for the fuelpump-shutoff, during motorbraking. The newer ones that is built in in the tps and the Ecu. //Peder
-
I wouldn´t suggest you run over 1,17 at all! The bearings in the turbo are only good up to 1,2bar. After that you need to use screwed or 360deg. Bearings, or maybe BB... //Peder
-
Hi does anyoneone have a wiringdiagram for only the engine management system? Im going to put a 505t engine in a old 504, and i think im going to use the original 505t system. Seems as if the bosch system is pretty good, otherwise im thinkin of putting a Vems system or maybe a haltech system in the car, but it could be fun (cheaper) if i could use the original. //Peder