krede Posted April 5, 2009 Report Share Posted April 5, 2009 Right... this might be a wired question, but what data will I need to provide for the guys at the machine shop to grind me a Danielson camshaft??. I have found a host of data in the archive.. but Im not certain exactly which of them I'll need.. Quote Link to comment Share on other sites More sharing options...
V-M Posted April 6, 2009 Report Share Posted April 6, 2009 There u have all info -> http://www.505turbo.com/forum/index.php?showtopic=14 This is all u need... Danielson camshaft 200 cv Open of the cams : 7,45 mm Total Inlet time open : 278° Total exhaust time open : 289° croisement : 45° Diagram : AOA : 21° RFA : 77° AOE : 85° RFE : 24° V-M Quote Link to comment Share on other sites More sharing options...
krede Posted April 6, 2009 Author Report Share Posted April 6, 2009 There u have all info -> http://www.505turbo.com/forum/index.php?showtopic=14 This is all u need... Danielson camshaft 200 cv Open of the cams : 7,45 mm Total Inlet time open : 278° Total exhaust time open : 289° croisement : 45° Diagram : AOA : 21° RFA : 77° AOE : 85° RFE : 24° V-M Thanks V-M... I plan on taking my parts to the machine shop tomorrow....apart from the cam, the cylinderhead needs to be "levelled" and possibly I'll have the valves and seats grinded too. And while Im there I'll probably also have the block decked for good measure... I'm not sure whether my spare cam is too worn to be recut.. or if they indeed are able to do the dani specs with a Murena cam... and if they aren't.... expect I'll get in touch with you!! Quote Link to comment Share on other sites More sharing options...
krede Posted April 13, 2009 Author Report Share Posted April 13, 2009 Do anybody have more info in the standard n9tea cam than: Diagram (stock N9T cam): AOA: 19°34 RFA: 56°26 AOE: 55°10 RFE: 12°50 Like lift duration etc? Quote Link to comment Share on other sites More sharing options...
Johnny Posted April 15, 2009 Report Share Posted April 15, 2009 The duration of the intake lobe is AOA + RFA + 180 = 254 degrees, and the duration of the exhaust lobe is AOE + RFE+ 180 = 248 degrees. Overlap is AOA +RFE = 32.4 degrees. Quote Link to comment Share on other sites More sharing options...
krede Posted April 15, 2009 Author Report Share Posted April 15, 2009 The duration of the intake lobe is AOA + RFA + 180 = 254 degrees, and the duration of the exhaust lobe is AOE + RFE+ 180 = 248 degrees. Overlap is AOA +RFE = 32.4 degrees. Thanks Johnny... how about lift?.. I belive the Danielson cam has more than standard? Quote Link to comment Share on other sites More sharing options...
V-M Posted April 15, 2009 Report Share Posted April 15, 2009 6.4mm std lift V-M Quote Link to comment Share on other sites More sharing options...
krede Posted April 15, 2009 Author Report Share Posted April 15, 2009 6.4mm std lift V-M Roger 10-4! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.