Search the Community
Showing results for tags '505 xn6'.
-
Hello All, I've been meaning to log in and ask questions, but I've been able to solve all my dumb little problems myself. I made it my summer/fall (now winter) project to resurrect a 1985 505S wagon with an XN6 and BA10? 5 speed that has been sitting in my parents driveway for 14 years. It was parked because the No 1 spark plug hole was stripped (I'm not sure why). I fixed that with a tight access helicoil kit, then got the in line fuel pump running (cursed at it and bashed it with a hammer), purged the crap out of the fuel dizzy and she started! but the clutch cylinders were dead. I topped off the reseviour, let it sit a week or two, and the cylinders came back to life! I was able to drive it out of the hole it was in for so long. Since then I have replaced/re routed vacuum lines to get it to run right (I guess!), replaced the in-tank and in line fuel pumps/filter/strainer, cleaned the gas tank and sender, cleaned/refilled the air filter, cleaned the WUR/air valve, JB welded the broken door handles, new tires, bailing wired the shifter link back on to the tranny (lol), changed engine oil/filter, shimmed the passenger side headlight (adjuster/mount has disintegrated!), cleaned a zillion electrical connections, verified the dizzy was advancing correctly, etc, etc.... And now it drives pretty good, but I need to replace the brakes, tranny/diff oil, fuel accumulator, fix the A/C, replace shifter link, and a few other things. Though tonight I was driving it, the plastic under the dash came down and interfered with my clutch foot, i kicked it and the car died ?, I upset the fuel pump taciymetric relay. Had to tow it home with my W250. I opened the relay, cleaned the contacts, and now it work intermittently. I'm gonna re-solder and re-cap before I declare it dead, it's just a relay with a 555 timer, some resistors/capacitors, diodes and transistors..........