[Ordering Parts]

Anyone have experience ordering parts from sunparts24.com/us? Still looking for a sending unit for my 505 turbo

[505 Sedan Fuel Sending unit]

Hi all...curious if anyone has a fuel sending unit for a 1987 505 sedan? Part number 1527.43. Or if anyone knows a site where one could be bought? Thanks in advance...this is proving to be a tough find. Also this is a turbo engine.

 

Matt

[Looking for 505 floor mats with logo]

Hi all,

I have a customer with a 87' 505...looking for a set of floor mats with the logo in good to great condition. He/we will pay absolute top dollar for a new set (if there is such a thing) or for a very good set. I feel like it's a stretch considering my searches have come up short, but I've had luck before with the great community here on PEG so I'm trying my luck again. Thank you for any and all replies and comments and/or help in locating sources. And please, my customer specifically wants floor mats with the logo on them.

 

Matt

[Exhaust manifold]

Damn! Finally someone who has the same part number as me! I will be in touch! Thank you!

[Exhaust manifold]

Brian thanks for getting back to me. I hope all is going well after your surgeries and please no apology is necessary. Yes I am still interested in that dipstick. My efforts have been shifted to this gasket so I apologize for the late reply. Thank you too for the information on what type of gasket I have. It's exactly what you've described and I'm having an insane time finding one. I did find out the hard way that I do have the stainless nuts and studs when one fell behind the motor mount bracket and I couldn't retrieve in with a magnet lol. Anyway,  I'll be in touch through private message about that dipstick. Thank you again and thank you all else who have helped me understand this fine automobile ☺

 

Matt

[Exhaust manifold]

Thanks for the reply bean. Have not checked for true yet, was leaving that as a last option...but now it seems I need to up the priority...the gasket I received did not have a part number however it is a Victor reinz.....it's a decent gasket but it does seem a little thinner than the OE metal one that came out. Everything mates up fine but around cylinders 1 and 2 I get the most leaking. Will check for true at some point this week and go from there. By chance do you have a part number for another gasket i could use? The gasket i recieved from a california source was in between 2 pieces of cardboard with no number. Thank you for your help.

[Exhaust manifold]

Hi all....have an N9te. ...was replacing the manifold gasket and I'm having a tough time getting it to seal. Was curious if anyone else has run into this problem before or had any tricks to get this to seal. Thanks in advance for any help.

 

Matt

[Wanted : N9te dipstick]

Thank you for the info! I will double check what I have....and sorry for the late replay...somehow I turned off email notification? Still working on that lol

On 3/30/2017 at 2:41 AM, V-M said:

2 different models exists. Short <-85, long -> 86

 

[Wanted : N9te dipstick]

Hi everyone. Looking for the oil dipstick for the N9te. If anyone has one available for purchase, please send me a photo via my email. Again my customer is very specific about the condition on used parts which is why I'd like to see photos. Thank you. And if anyone knows of a p/n for a new equivalent one, that'd be great too. Thank you. Email is [email protected]

[Wanted : 1987 505 turbo intake tube]

Thanks for the info SSB. Bills was in such good shape it was exactly what my customer wanted. Thank you all again for the help and info!

[Wanted : 1987 505 turbo intake tube]

Fantastic link! Thank you very much. I'm going to ask my customer if he'd like the aftermarket. I think he's more an original parts guy if we can help it so bill, I may be reaching out to you as well when I hear from my customer. Thank you all again for your help. Much appreciated

[Wanted : 1987 505 turbo intake tube]

That's the one!....mine has a huge hole in it and crumbled in my hand.

[Wanted : 1987 505 turbo intake tube]

Thanks for the reply....I'm assuming it's for sale? And thanks for posting pictures

[Wanted : 1987 505 turbo intake tube]

Hi, new to the forum. In search of the intake tube that attaches to the turbo on the N9te engine. My customer is looking for one in the best shape possible so any photos are appreciated. Thanks in advance.

[1987 Peugeot 505 Turbo ABS Car – Parting Out]

Hi, new to the forum. Trying to locate the intake tube for the N9te engine connected to the turbo. Curious if that is available on this vehicle and if you could grab a quick photo of it. Thanks in advance.