Jump to content

Radio removal, early 505 dashboard


Recommended Posts

Hi All,

Does anyone know the correct procedure to remove an original 505 radio from an early dash?  I see two screws up by the top of the radio portion and tried removing the ashtray below but found nothing in there.  After removing the screws it was more loose but still nowhere near coming out.

Thanks,

Todd

IMG_2933.JPG

Link to post
Share on other sites

I still haven't figured out how to get it out and have given up for the moment till I know more.  I don't want to break anything.  I guess my radio will have to lay silent for the time being 😉

Link to post
Share on other sites
  • 2 weeks later...

Back in olden times ;) - decks like that used the volume and tuner buttons to hold the stereo to the face plate. It looks like the console cover is that plate so you might want to pull the knobs off to see if the nuts on the shaft hold it.

I also seem to remember that there’s a nut on the back side that supports the back of the stereo. Might want to see if you can take a peak behind for something like that.

Pure guesses as it’s been MANY years since messing with a series 1 dash.

Rabin

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...