ofArc Posted November 23, 2019 Report Share Posted November 23, 2019 I found these 4x140 to 5x100 wheel adapters on a site for old Subarus: https://www.sjrlift.com/collections/wheel-options/products/4-x-140-to-5-x-100-wheel-adapter-1-thick-sjr Does anyone know if the 14mm bolts for the adapter would fit our hubs? I guess they finally ran out of old 505 wheels to steal! Quote Link to comment Share on other sites More sharing options...
Bean Posted November 23, 2019 Report Share Posted November 23, 2019 Peugeot wheels are lug centric, so while you could likely use those I’m not sure you’d be able to properly center them since they’re bolted to the hub from the back side. m14 would likely still be loose in the stud holes as Peugeot wheel studs have a decent sized splined interference fit. Ideally you’d need some conical washers or bushings that centered the m14 bolts when tightening the adapter bolts... These do look like a decent backyard adapters, but for $500 I’d want them done on a lathe and machined to center on Peugeot hubs. Rabin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.